Union Community Virdi 4000 User Guide

VIRDI 4000 User Guide 56
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
- Menu “3.Option”  “1.Application”  [1] T&A (Time Attendance) settings
- If the start/leave time is fixed, set <start time>, <leave time>, and <normal
time> to reduce user input errors.
4.2.1. Authentication mode
- Authentication mode display screen
== 00:00
Normal mode; authentication with [ENTER]
==
START
00:00
Start mode; authentication with [F1]
==
LEAVE
00:00
Leave mode; authentication with [F2]
== OUT 00:00
Outside work mode; authentication with
[F3]
== BACK 00:00
Return mode; authentication with [F4]
- Fingerprint authentication
Press the function key for working mode authentication.
If the function key is not used and authentication is done with Auto Sensing,
the current authentication mode on the screen is used.
- Password authentication
After entering the user ID and changing the authentication mode by pressing
the corresponding function key, enter the password for authentication.
- When a card is used together (i.e., Menu  6.Device settings  3. Card
reader  when <Card Reader> is set to over 1)
When entering the function key, only the working mode is changed instead of
entering into fingerprint authentication, so change the working mode by
pressing the corresponding function key to enter the card.
- Working mode after authentication depends on <start time>, <leave time>, and
<normal time> settings. The previous authentication mode is maintained if no
mode is set for a specific time period.
4.2.2. [1:1] fingerprint authentication
- the same as 4.1.2.
4.2.3. [1:N] fingerprint authentication

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English