Union Community Virdi 4000 User Guide

VIRDI 4000 User Guide 25
Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr
3.3.3.1. “1. FP” user
If a user’s fingerprint is already registered, changing the identification level or
additional fingerprint registration is possible.
1. 1:1 Level
2. Add FP
To change the authentication level, press [1]. To
add a fingerprint to the corresponding ID, press
[2].
※ A maximum of 5 fingerprints can be added to an ID. If there is an attempt to
add more than 5 fingerprints, a “ppibig” buzzer sound will be heard when the
user presses [2].
[1] When Verification level change is selected
< 1:1 Level>
( 0-9 ) : 0
Recommended setting: ‘0’
To change settings, enter the new settings.
[2] When register additional fingerprints is selected
<Add FP>
Input Your FP
You will hear a “ppiriririck” buzzer sound twice and a light on the fingerprint
sensor will turn on. Place a finger onto the fingerprint input window and wait for
2~3 sec. until the light turns off and the fingerprint is saved.
If you hear a “ppiririck” buzzer sound, registration is successful. It returns to the
“1.Add” screen. If the fingerprint image is not so good or there is no input in the
window for 10 sec. after the fingerprint sensor light turned on, it returns to the “1.
Add” screen with a failure buzzer sound “ppibig”.
3.3.3.2. “2.ID&PW” user
when a user wants to change his/her password
1. Modify PW
To change passwords, press [1]. To cancel it,
press [#].
Press the [1] button to change the passwords

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English