VIRDI 4000
TM
User’s Manual
24
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
If registration succeeds, a “ppiririck” buzzer sound rings. Then, it returns to the
“1.Add” screen. If they are different, a “ppibig” buzzer sound indicates failure
rings and the “1.Add” menu screen appears.
3.3.1.3. “3. FP/PW” registration
After both fingerprint and password are registered, authentication method is
selectable as either fingerprint or password.
◆ [*] [1] [1] User ID [ENTER] [3] Input PW [ENTER]
Input same PW [ENTER] 1:1 Level [ENTER] Enable 1:N [ENTER]
Input FP Input same FP ◆
As mentioned above, password registration (refer to “2. ID&PW” ②
registration) precedes fingerprint registration (refer to “1. FP” registration).①
3.3.1.4. “4. FP&PW” registration
After both fingerprint and password are registered, fingerprint authentication
and password authentication are needed for access. Fingerprint authentication
precedes password authentication.
◆ [*] [1] [1] User ID [ENTER] [4] Input PW [ENTER]
Input same PW [ENTER] 1:1 Level [ENTER] Enable 1:N [ENTER]
Input FP Input same FP ◆
3.3.1.5. “5. RF” registration
Card registration and card authentication.
◆ [*] [1] [1] User ID [ENTER] [5] Place the card ◆
Place Your Card
To cancel registration, press the [#] button.
If a user places the card close to the unit, a “ppiririck” buzzer sounds on
successful registration. “1. Add” menu appears.
3.3.1.6. “6. RF/FP” registration
After both card and fingerprint are registered, authentication method is
selectable as either card or fingerprint.
◆ [*] [1] [1] User ID [ENTER] [6] Place the card
1:1 Level [ENTER] Enable 1:N [ENTER]
Input FP Input same FP ◆
To Next Page
Loading...
Need help?
General
