Union Community Virdi 4000 User Manual

VIRDI 4000
TM
User’s Manual 54
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
== 00:00
During authentication request to the authentication
server, a network problem occurred or the network
was disconnected.
▶ In case of users who are registered as [fingerprint & password], the correct
password input is required after successful fingerprint authentication.
4.1.4. Password authentication
▶ If the user ID is “0001”, input “0001” and press the function key. The terminal
waits for the user password to be input after a “ppiriririck” buzzer sound. Input
the relevant password and press [ENTER]. The authentication result appears on
the LCD.
== 00:00
0001
If the user ID is ‘0001’, enter ‘0001’ and press the
function key.
▼
== 00:00
******
The terminal waits for the user password to be input
after which a “ppiriririck” buzzer sounds. Input the
relevant password and press [ENTER]. For security
reasons, the password is displayed as ‘*’ on the LCD
screen, not the actual numbers.
▼
== 00:00
If authentication is successful, a success message is
displayed on the LCD together with a voice
message “You are authorised”. The door LED turns
on and door relay runs.
The default screen appears after 1~2 seconds. The
door LED turns off and door relay releases after the
door open setting time has elapsed.
※ Error message: An error message appears together with the voice message
“Please try again”.
== 00:00
In case of authentication failure.
== 00:00
Non-registered user ID.
== 00:00
During authentication request to the authentication
server, a network problem occurred or the network
was disconnected.

Union Community Virdi 4000 Specifications

General

Brand	Union Community
Model	Virdi 4000
Category	IP Access Controllers
Language	English