EasyManua.ls Logo

Unipower UP-2210R - User Manual

Default Icon
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UNIPOWER
UP-2210R/P
UP-2210R/P Hardware installation and configuration manual
English version 20.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Unipower UP-2210R and is the answer not in the manual?

Unipower UP-2210R Specifications

General IconGeneral
BrandUnipower
ModelUP-2210R
CategoryMeasuring Instruments
LanguageEnglish

Summary

1 SAFETY INFORMATION

1.1 Installation Conditions

Guidelines for a safe and conducive installation environment, avoiding hazards.

1.2 Installing the Instrument

Essential conditions for optimal measurement and accident prevention during installation.

1.3 Power Supply

Recommendations for clean power sources, UPS, and fuse protection.

4 INSTALLING PERMANENT METER UP-2210 R;P

4.1 Location and Fitting

Guidance on selecting an appropriate location and fitting the UP-2210R/P unit.

4.4 Connection Alternatives

Various methods for connecting measurement transformers to the UP-2210.

4.5 Vector Graph for Correct Connection

6 Display

7 INSTALLING COMMUNICATION EQUIPMENT

7.1 Ethernet

Setup and configuration for Ethernet network communication with the meter.

DIP-Switch Settings

8 GPS CLOCK SYNCHRONISATION MODULE

8.1 Installation

Steps for physically connecting the GPS adapter to the UP-2210 unit.

8.1.1 GPS Communication Configuration

Configuring GPS communication settings via the PQ Online software.

8.4 GPS Connection Instruction for UP2210;UP2210 R

Detailed instructions for connecting a Garmin GPS antenna to the meter.

9 Installing Software

9.3 Installing PQ Online

Step-by-step guide for installing the PQ Online software.

10 PQ ONLINE

10.1 Connect

How to establish a connection to the meter using PQ Online via Serial or Ethernet.

10.2 Measurement Settings

Configuration of measurement parameters and settings for the meter.

10.2.1 Wire-Connection Configuration. Settings Wizard

Using the settings wizard to guide meter configuration.

10.2.2 Advanced Settings

Advanced configuration options for meter settings.

10.3 Real-time

Using PQ Online for real-time monitoring and analysis of power quality parameters.

10.4 Communication Settings

Configuration of network and communication parameters for the meter.

11 APPENDIX - COMISSIONING CHECKLISTS

11.1 Meter Installation Checklist

Checklist for verifying meter installation and configuration on site.

2 Check the Connection;Wiring

2.2 Check Vector Diagram (Voltage Phase Sequence)

Verifying the voltage phase sequence and vector diagram display.

Related product manuals