Obtain IP Address
automatically
(DHCP Client)
Do NOT select this unless you have a DHCP Server on your LAN. A
DHCP Server can provide an IP Address to PCs and other devices
when they boot.
Select this if your LAN does not have a DHCP Server, and enter the
following data.
IP Address: The IP Address must be unused, and compatible with
the PCs on your LAN.
Network Mask: Enter the same Network Mask (Subnet Mask) used
by PCs on your LAN.
Gateway: If your LAN has a Router or Gateway, enter its IP Address
here. Otherwise, leave this blank.
DNS Server
A DNS (Domain Name Server) translates Internet addresses (e.g. microsoft.com) to IP Addresses. Use the same
values as on your PC, or recommended by your ISP (Internet Service Provider). At least one (1) DNS entry is
required if using either the "E-Mail Alert" feature. Otherwise, the DNS entries may be left blank.
Obtain DNS Server
Addresses from DHCP
Server
Select this if you want to obtain DNS Server Addresses from DHCP server
when DHCP Client is enabled.
Use Fixed DNS Server
Addresses
Select this if you want to specify some DNS Server Addresses.
Primary: IP Address of the first DNS Server.
Backup 1: IP Address of the DNS Server to be tried if the first server is
busy.
Backup 2: IP Address of the DNS Server to be tried if the second server is
busy.
Click this button to save the settings on the page.
Click this button to cancel the modifications on the page.
To Next Page
Loading...
Need help?
General
