14
7. Click Save to save your configuration to the NAS. On the next screen, click Exit to close the Setup utility.
The NAS is now operational.
METHOD 2 – USING THE WEB INTERFACE
1. Open up your web browser, and type in the address bar: http://myxerver. (“myxerver” is the default
name of the NAS, if you have not changed it). The following welcome screen will be displayed.
2. Click on Administration. A window will pop up, requesting for user name and password. Enter user name
as “admin”, and leave the password blank.
3. Click on the Network menu item. The IP configuration screen will be displayed.
To Next Page
Loading...
Need help?
General
