UNIVERSAL TECH MyXerver MX3600 User Manual

15
Obtain an IP address
automatically
(DHCP Client)
Select this only if your LAN has a DHCP Server which can allocate IP
address automatically.
Fixed IP Address
You need to enter the following data:
IP address: The utility will suggest an unused IP address within the
address range used on your LAN. If you wish, you can change this,
but you must ensure the address is unused.
Network Mask: This must match the value used by PCs on your LAN.
Gateway: This must match the value used by PCs on your LAN.
After entering your IP configuration, click on Save button.
4. Next, select the System menu item.
Server Name
The default name is MyXerver. Change this to your own preferred
server name.
Workgroup Name
Normally this name should match the Workgroup name used by PCs
on your LAN.
Time Zone
Select your time zone from the list
Local Date / Time
Enter the local date (mm/dd/yyyy format) and time
After setting the above parameters, click on Save button. Please wait 1-2 mins for the configuration
to take effect.

UNIVERSAL TECH MyXerver MX3600 Specifications

General

Brand	UNIVERSAL TECH
Model	MyXerver MX3600
Category	Storage
Language	English