51
Note: Your Router/Gateway must be able to support Dynamic DNS feature. Please
check the router manual for more information.
The following section gives a general description on how to configure and use Dynamic DNS feature.
1 First of all you need to find a Dynamic DNS provider to register and get your domain name. Some popular
Dynamic DNS providers are DynDNS and TZO. You may need to purchase the domain name.
2 Enable Dynamic DNS feature in your Router/Gateway. In a typical router you will need to setup the following:
Enable the DDNS feature
Specify the DDNS service provider name
Enter the host name which you have registered with the dynamic DNS service provider (example:
http://myhost.mydomain.net)
Enter username and password provided by the DDNS service provider
3 If you wish to access the NAS remotely from the internet, you can now type for example
http://myhost.mydomain.net.
To Next Page
Loading...