Uponor Smatrix Base User Manual

Write Clon ed set tings
Caution!
Do not remove the microSD card while writing
cloned settings.
To write cloned settings to the microSD card:
1. Go to the SD card menu, Main menu > System
settings > SD card.
2. Press Write cloned settings.
3. Confirm that any existing cloned settings on the
microSD card will be lost and replaced with the ones
from the interface.
4. Wait until the interface shows a screen informing
that the cloned settings has been saved.
5. A clone of the settings on the interface has now
been saved on the microSD card.
read Clone d sett ings
Caution!
Do not remove the microSD card while
reading cloned settings.
To read cloned settings to the interface:
1. Use a microSD card from an identical system.
2. Replace the existing microSD card in the interface
with the new one.
3. Go to the SD card menu, Main menu > System
settings > SD card.
4. Press Read cloned settings.
5. Confirm that any existing settings will be lost and
replaced with the ones on the microSD card.
6. Wait until the interface has restarted and the home
screen is shown again.
7. Replace the microSD card with the old one.
8. The cloning of settings is now complete.
add d isPlay la nguag es
To add a new display language:
1. Insert a microSD card, containing the language
packages (supplied with the interface), into the
interface.
2. Go to the Language menu, Main menu >
Preferences > Language.
3. Use buttons < or > to scroll between available
language packages.
4. Select a new language and press the confirm
button.
The current language package will be saved on the
interface, overwriting the existing package, and the
selected language will be set. The microSD card can
be ejected without interfering with the language
setting.
14.17 Factory reset of the interface
NOTE!
Do not factory reset the interface if not
absolutely needed.
NOTE!
A factory reset removes the registration data
from the interface.
To reset the interface to factory settings:
1. Go to the Preferences menu, Main menu >
Preferences.
2. Press Factory reset.
3. Press and hold the confirm button to initiate factory
reset. All existing settings will be lost and reset to
factory default values.
4. Wait until the interface has restarted and the start
up guide is shown.
5. The process of factory reset of the interface is now
complete.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
111
UPONOR SMATRIX BASE/BASE PRO · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Base Specifications

General

Brand	Uponor
Model	Smatrix Base
Category	Heating System
Language	English