12.6 Run mode
During normal operation the thermostat is in run mode.
While in run mode the display shows specific control
mode information.
12.7 Control mode
The thermostat has four different control modes, set in
the settings menu.
Control modes:
T-149
T-146/
T-148 Description
RT Room temperature
RFT Room temperature with external floor
sensor
RS Remote sensor
RO Room temperature with remote
outdoor sensor
Different types of information can be shown in the
display when in a control mode. The digital thermostat
T-148 also shows the clock and scheduled program
information.
Use the OK button to toggle between the information
available.
rt, room temPeratur e mode
1. Room temperature (default)
2. Alarm list (only shown if an alarm is present in a
T-149 thermostat)
3. Room temperature, current ECO/Comfort mode,
and current heating/cooling demand (T-169 only)
4. Relative humidity (T-148 only)
rft, room floor tem Perature mode
1. Room temperature (default)
2. Alarm list (only shown if an alarm is present in a
T-149 thermostat)
3. Floor temperature, current ECO/Comfort mode, and
current heating/cooling demand (T-149 only)
4. Relative humidity (T-148 and T-149 only)
5. Floor temperature (T-146 and T-148 only)
1. Room temperature (default)
2. Alarm list (only shown if an alarm is present in a
T-149 thermostat)
3. Remote sensor, current ECO/Comfort mode, and
current heating/cooling demand (T-149 only)
4. Relative humidity (T-148 and T-149 only)
ro, remote outdoor sensor m ode
1. Room temperature (default)
2. Alarm list (only shown if an alarm is present in a
T-149 thermostat)
3. Outdoor temperature, current ECO/Comfort mode,
and current heating/cooling demand (T-149 only)
4. Relative humidity (T-148 and T-149 only)
5. Outdoor temperature (T-146 and T-148 only)
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
UPONOR SMATRIX BASE/BASE PRO · INSTALLATION AND OPERATION MANUAL