Uponor Smatrix Base User Manual

set Parameter
Use the arrow buttons, < and >, to move the marker
between characters and use buttons - or + to change
the previously set value.
Save the parameter with the green check mark or cancel
and revert to previous setting with the red X.
Menu
Value : Value
Parameter: Value
aCtivation li st
Activate or deactivate settings from a list by pressing on
the blue button next to the parameter name.
Activated parameter is illustrated with a green check
mark, deactivated with a red X.
Menu
ActivationList
Number 1
Number 2
Number 3
Number 4
14.4 Adjust temperature
With the interface the room temperature of every room
in the system can be monitored and adjusted.
BEA
Home Away
Thursday 2015.03.31 12:34
BA DC
Room 1.01
To adjust the temperature in a room:
1. Start from the home screen (if more than 4
controllers are connected to each other).
2. Select the controller (E) in control of the room.
3. Press the left or right arrow (A or B) until the right
room menu is displayed.
4. Use buttons - or + (C and D) to adjust the setpoint
temperature of the room. If Thermostat override
(available in Room settings) is not allowed, a
grey area is showed instead, and setpoint cannot
be changed from the interface (for analogue
thermostats only).
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
99
UPONOR SMATRIX BASE/BASE PRO · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Base Specifications

General

Brand	Uponor
Model	Smatrix Base
Category	Heating System
Language	English