Uponor Smatrix Base User Manual

00 Program (t-148 only)
In this menu, one of seven different scheduling
programs for Comfort/ECO mode can be set.
Program 1 to 6 is pre-programmed and the 7th is user
defined. The scheduled programs show the day split
into 30 minute intervals which is set to either Comfort
(black marker) or ECO mode (blank marker).
This menu is not visible if an interface is connected to
the system. Settings are referred to an interface (Base
PRO only).
Program Off (default):
Room is set in Comfort mode. If a timer is available
in the system, the room will use those set schedules
but the thermostats own ECO mode setback
temperature.
Program P1:
Program P2:
Program P3:
Program P4:
Program P5:
Program P6:
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
84
UPONOR SMATRIX BASE/BASE PRO · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Base Specifications

General

Compatibility	Uponor Smatrix thermostats and actuators
Enclosure Rating	IP20
Communication Protocol	Proprietary Uponor Smatrix protocol
Operating Temperature	0°C to +45°C
Storage Temperature	-20°C to +60°C
Relative Humidity	20% to 80% non-condensing