1-3-14
2GM
Figure 1-3-31
NOTES
• Always adjust the paper stopper and paper width
guides before loading paper into the cassette.
Failure to do so may result in skewed paper feed
and/or a paper jam.
• Make sure that the paper is set securely against the
paper stopper and the paper width guides. If there
is any gap between the paper and the stopper or
guides, readjust the paper stopper and/or the paper
width guides, as appropriate.
• When you are loading paper into the cassette,
make sure that the side to be copied or printed onto
is facing downward.
• Be sure to load paper so that it is not folded or
curled, etc.
• Do not load more paper than indicated by the lines
located on the width guides.
5. Push the cassette securely all the way back into
the machine until it stops.
Figure 1-3-32
Paper width guide
Cassette
To Next Page
Loading...
Need help?
General
