EasyManuals Logo

Uwatec Aladin A1 User Manual

Uwatec Aladin A1
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
English
A1 USER MANUAL
2.1.1 Setting the alarm clock
From the Watch menu press the SEL/
ESC button to enter the Alarm submenu.
Here you can activate or deactivate the
alarm clock by pressing the +/UP or -/
DOWN buttons. Selecting ALARM ON will
allow you to set the time of the alarm. You
can scroll the hours by pressing +/UP or
-/DOWN buttons. Pressing the SEL/
ESC button will conrm the hour setting
and switch to minutes. You can scroll the
minutes by pressing +/UP or -/DOWN
buttons. Pressing the SEL/ESC button will
conrm the minutes setting and activate
the alarm.
2.1.2 Setting UTC 1
The UTC setting will change the displayed
time compared to Greenwich 0-Meridian.
This feature is practical when traveling
through different time zones. By pressing
SEL/ESC you may edit the hours with +/
UP or -/DOWN buttons in a range of +14h
to -13h. By pressing SEL/ESC the minutes
will be highlighted and you may edit them
with +/UP or -/DOWN buttons in 15-minute
increments. The UTC 1 setting will be
conrmed by pressing the SEL/ESC button.
2.1.3 Setting UTC 2
Dual time uses the same “base time” as
the main clock. Therefore, adjusting the
time as described in section ‘Setting the
time’ will also inuence the dual time. The
dual time zone selection will dene the
difference to the main clock time. When the
time zone selection is OFF, then the dual
time is disabled. When pressing the SEL/
ESC button the UTC 2 time hours will be
highlighted. You may change the setting
by pressing the +/UP or -/DOWN buttons
in a range of +14h to -13h or by selecting
OFF. By pressing the SEL/ESC button,
the minutes will be highlighted and you
may edit them using the +/UP or -/DOWN
buttons in 15-minute increments. The UTC
2 setting will be conrmed by pressing the
SEL/ESC button.
2.1.4 Setting the time
By pressing the SEL/ESC button in the
Set Time submenu the time setting will be
activated. You may change the hours with
+/UP or -/DOWN buttons. By pressing the
SEL/ESC button the selection will change
to minutes and can be edited. The new
time setting will be conrmed by pressing
the SEL/ESC button.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uwatec Aladin A1 and is the answer not in the manual?

Uwatec Aladin A1 Specifications

General IconGeneral
BrandUwatec
ModelAladin A1
CategoryWatch
LanguageEnglish

Related product manuals