Uwatec Aladin A1 User Manual

23
English
A1 USER MANUAL
Stroke length
Stroke depth
By pressing SEL/ESC in the Swim menu,
you reach the swim mode settings. By
pressing SEL/ESC the counter stroke
threshold (rst depth, then length) will be
highlighted. A too large threshold setting
will detect only a large movement as a
stroke, a too small setting may detect too
many strokes. You must test and adjust
this according to your swimming style. By
pressing the +/UP or -/DOWN buttons
the value can be selected from 2cm/1in to
40cm/16in. A press of the SEL/ESC button
saves the setting.
Pressing the SEL/ESC button will take
you back to the previous submenu where
you can toggle down to the stroke length
settings. These values can be set from
0.5m/2ft to 5.0m/16ft by pressing the +/UP
or -/DOWN buttons. Conrm your settings
by pressing the SEL/ESC button.
To convert each stroke to a distance, the
A1 needs an average length of a stroke.
This is similar to a pedometer which uses
a step length to convert the distance. You
can calibrate this in a swimming pool where
you know the length and can use the A1
stroke count to calculate the correct length.
3.1.3 Sound settings
Next on the Settings menu listing is
Sound. Press the SEL/ESC button to enter.
SOUND
BUZZER
BUTTON
DIVE
RETURN
SEL
UP
DOWN
ESC
UP
UP
UP
DOWN
DOWN
DOWN
ESC

Uwatec Aladin A1 Specifications

General

Brand	Uwatec
Model	Aladin A1
Category	Watch
Language	English