54
A1 USER MANUAL
Once the code is accepted by the device
you want to connect to, the link is ready for
communication.
5.2 LogTRAK
LogTRAK is the software that allows
the A1 to communicate with various
operating systems. LogTRAK is available
for Windows, Mac, Android and iOS. In
the following section, Windows and Mac
versions of LogTRAK are represented.
Android and iPhone/iPad versions of
LogTRAK operate similarly but do not have
all of the features offered in the PC/Mac
versions.
5.2.1 Connecting the A1 with
LogTRAK
To start the communication using
Bluetooth:
1. Pair the A1 with the device where
LogTRAK is running.
2. Launch LogTRAK.
3. Check that the A1 is detected by
LogTRAK.
Extras -> Options -> Download:
Choose “Bluetooth Low Energy” option.
F
NOTE: The A1 has a timeout of 5
minutes for a non-active Bluetooth
connection. After this interval the A1
will disable Bluetooth and return to
time and date mode.
F
NOTE: Desktop PCs need a generic
Bluetooth Low Energy (4.0) dongle,
if there is no build in Bluetooth 4.0
or newer module. Windows version
below 8.0 and Mac computers require
an external Bluegiga BLED Bluetooth
dongle.
5.2.2 Download dive proles
From LogTRAK, by selecting Dive ->
Download Dives you can transfer the A1
Logbook to your PC/Mac.
There are 3 main views, each showing a
specic part of your dive logs:
1. Prole, showing the graphical data of
the dive.
2. Details about the dive, where you
can edit, for example, the equipment
information.
3. Location, which shows your dive site
on the world map.
The selection tabs for views are found
along the left side of the main window.
To Next Page
Loading...
Need help?
General
