Uwatec Aladin A1 User Manual

29
English
A1 USER MANUAL
3.2.3.4 Dive depth incremental alarm
In initial factory settings the dive depth
incremental alarm is switched off.
You may select the alarm value from 5 to
100m (20 to 330ft) in 1m/5ft increments,
and the direction can be selected as UP/
DOWN/BOTH. Press the +/UP or -/DOWN
buttons to select direction, then the SEL/
ESC button, then the +/UP or -/DOWN
buttons again to set the depth, followed by
a nal press of the SEL/ESC button to save
the setting.
3.2.3.5 Dive time interval alarm
By pressing the SEL/ESC button the
function will be highlighted and you may
enable or disable the dive time interval
alarm by choosing AUDIBLE or OFF by
pressing the +/UP or -/DOWN buttons.
By selecting AUDIBLE and then pressing
the SEL/ESC button the time value will
be highlighted, and by pressing the +/UP
or -/DOWN buttons you can select the
interval from 15 seconds up to 10 minutes
in 15 second increments. By pressing the
SEL/ESC button again the settings will be
conrmed.
3.2.3.6 Surface interval alarm
By pressing the SEL/ESC button the
function will be highlighted and you may
enable or disable the surface interval alarm
by choosing AUDIBLE or OFF by pressing
the +/UP or -/DOWN buttons. By selecting
AUDIBLE and then pressing the SEL/ESC
button the time value will be highlighted,
and by pressing the +/UP or -/DOWN
buttons you can select the interval from 15
seconds up to 10 minutes in 15 second
increments. By pressing the SEL/ESC
button again the settings will be conrmed.

Uwatec Aladin A1 Specifications

General

Brand	Uwatec
Model	Aladin A1
Category	Watch
Language	English