34
A1 USER MANUAL
3.5 Reading the logbook
You can check your dive statistics by
pressing the SEL/ESC button when in the
Logbook menu.
On the display below, the A1 has 11 dives
and total of 6 hours of diving in the Logbook,
with the deepest dive at 57.0 meters and a
longest dive time of 80 minutes.
By pressing the SEL/ESC button you will
enter the repository of the logs where you
can scroll through your dives with the +/
UP or -/DOWN buttons. The below display
shows the following information: Dive
number, dive mode, dive start time and
date.
By pressing the SEL/ESC button on
the above screen the A1 will display the
graphical prole of the dive. This screen
shows the following information: Maximum
depth, total duration of the dive and the
minimum temperature of the water.
By pressing the +/UP button on the above
screen the following information will appear
as in the screen below:
Counted repetitive dive (rep 1 is the rst
dive), start and nish time of the dive,
microbubble level of the dive (L5) and the
altitude class (C0) of the dive.
F
NOTE: The capacity of the A1’s
logbook is around 50 hours with a
4-second sampling rate.
To Next Page
Loading...
Need help?
General
