Uwatec Aladin A1 User Manual

30
A1 USER MANUAL
3.2.3.7 Ascent speed alarm
By pressing the SEL/ESC button the
function will be highlighted and you may
enable or disable the ascent speed alarm
by choosing AUDIBLE or OFF by pressing
the +/UP or -/DOWN buttons. By selecting
AUDIBLE and then pressing the SEL/ESC
button the value will be highlighted, and
by pressing the +/UP or -/DOWN buttons
you can select the interval from 0.1 to
5.0 meters/second (1 to 15 feet/second)
in 0.1m/sec or 1ft/sec increments. By
pressing the SEL/ESC button again the
settings will be conrmed.
3.2.4 Warning settings
There are three warnings which can be
enabled and edited directly in the A1. The
rest of the warnings can only be enabled /
disabled via SCUBAPRO LogTRAK
program. To learn more about the warnings
see chapter 4.4 Alarms and warnings
during diving.
WARNING
DIVE TIME
DEPTH
MOD
RETURN
DOWN
UP
SEL
ESC
ESC
UP
UP
UP
DOWN
DOWN
DOWN
3.2.4.1 Dive time warning
In initial factory settings the dive time
warning is switched off. When you select
dive time and switch the warning on,
the value can be adjusted from 5 to
195 minutes in 5-minute increments by
pressing the +/UP or -/DOWN buttons. The
selection is conrmed by pressing the SEL/
ESC button.

Uwatec Aladin A1 Specifications

General

Brand	Uwatec
Model	Aladin A1
Category	Watch
Language	English