38
A1 USER MANUAL
Maximum depth
reached during
current dive
4.1.2.2 GAUGE mode display
selection
In GAUGE mode you can choose from
two display versions while diving: Light or
Classic. The following screens illustrate
the information in the middle of the screen
which can be selected as shown in the
sections below.
F
NOTE: When the A1 is set to GAUGE
mode, it will only monitor depth, time,
and temperature, and it will not carry
out any decompression calculations.
Due to this there are fewer alternative
displays to scroll through.
4.1.2.2.1 Light version
Timer
Current depth
Elapsed dive time
Average depth
F
NOTE: The average depth can be
reset by a press-and-hold of the +/UP
button when it is active on the screen.
To Next Page
Loading...
Need help?
General
