40
A1 USER MANUAL
F
NOTE: The dive depth displayed in
large size in the middle part of the
screen is shown with no decimal
values rounded up or down, but
the actual depth is always precisely
saved and shown in the logbook with
0.1m/1ft accuracy.
4.2 Safety stop timer
If a minimum depth of 10m/30ft is reached
during the dive, at a depth of 5m/15ft the
safety stop timer will automatically start
a 3-minute countdown. If you go below
6.5m/20ft, the timer will disappear and the
no-stop time will be shown again. Upon
returning to 5m/15ft, the timer will start
again automatically.
4.3 Activating the backlight
To activate the backlight, press the
LIGHT button. For setting the duration
of the backlight refer to chapter 3.1.1.1
Backlight.
F
NOTE: The backlight is not available
when the CHANGE BATTERY warning
appears.
4.4 Alarms and warnings
during diving
The A1 can alert you to potentially
dangerous situations via warnings and
alarms. You can modify the warning and
alarm settings in the menus or via the
LogTRAK interface.
General warnings and alarms are
shown in inverted text (white with black
background) in the middle of the display.
Additionally, audible signals are available
when the sound function is enabled.
Warnings are shown for 12 seconds or
they can be conrmed by pressing the
SEL/ESC button which changes the
alarm display back to the normal dive
display. However, if the warning condition
continues, the warning can be recalled
by scrolling with the +/UP or -/DOWN
buttons. Alarms can also be conrmed
by pressing the SEL/ESC button, but
they remain on the alternate display which
can be scrolled through with the +/UP or
-/DOWN buttons.
WARNING
When the A1’s buzzer is disabled all audible
alarms and warnings are muted but will still
appear on the display if triggered.
4.4.1 Maximum depth warning
If you have enabled the maximum depth
warning, the below display will be shown
when the selected depth is reached. Refer
to chapter 3.2.4.2 Dive depth warning for
setting this warning.
To Next Page
Loading...
Need help?
General
