Vacon 100 INDUSTRIAL - Page 100

Table 32: Motor control settings
Index Parameter Min Max Unit Default ID Description
P3.1.2.1 Control Mode 0 2 0 600
0 = Frequency control
1 = Speed control
2 = Torque control
P3.1.2.2 Motor Type 0 2 0 650
0 = Induction motor
1 = PM motor
2 = Reluctance motor
P3.1.2.3 Switching Frequency 1.5 Varies kHz Varies 601
P3.1.2.4 Identification 0 2 0 631
0 = No action
1 = At standstill
2 = With rotation
P3.1.2.5 Magnetizing Current 0.0 2*IH A 0.0 612
P3.1.2.6 Motor Switch 0 1 0 653
0 = Disabled
1 = Enabled
P3.1.2.7 Load Drooping 0.00 20.00 % 0.00 620
P3.1.2.8 Load Drooping Time 0.00 2.00 s 0.00 656
P3.1.2.9 Load Drooping Mode 0 1 0 1534
0 = Normal.
1 = Linear removal.
P3.1.2.10 Overvoltage Control 0 1 1 607
0 = Disabled
1 = Enabled
P3.1.2.11 Undervoltage Control 0 1 1 608
0 = Disabled
1 = Enabled
P3.1.2.12 Energy Optimization 0 1 0 666
0 = Disabled
1 = Enabled
P3.1.2.13 Stator Voltage Adjust 50.0 150.0 % 100.0 659
P3.1.2.14 Overmodulation 0 1 1 1515
0 = Disabled
1 = Enabled
P3.1.2.15 Rs Voltage Drop 0.00 50.00 % 0.00 662
P3.1.2.16 Ls Voltage Drop 0.00 200.00 % 0.00 673
P3.1.2.17 Motor BEM Voltage 0 Varies V 0 674
VACON · 100 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/