Vacon 100 INDUSTRIAL - 12 Appendix; The Default Values of Parameters in the Different Applications

12 APPENDIX 1
12.1 THE DEFAULT VALUES OF PARAMETERS IN THE DIFFERENT
APPLICATIONS
The explanation of symbols in the table
•
A = Standard application
•
B = Local/ Remote application
•
C = Multi-step speed application
•
D = PID control application
•
E = Multi-purpose application
•
F = Motor potentiometer application
APPENDIX 1 VACON · 355
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
12