Vacon 100 INDUSTRIAL - Analogue Outputs

P3.5.3.2.3 RO1 OFF DELAY (ID 11003)
Use this parameter to set the OFF delay for the relay output.
10.6.6 ANALOGUE OUTPUTS
P3.5.4.1.1 AO1 FUNCTION (ID 10050)
Use this parameter to select a function or a signal that is connected to the analogue output.
The contents of the analogue output signal 1 are specified in this parameter. The scaling of
the analogue output signal depends on the signal.
VACON · 264 PARAMETER DESCRIPTIONS
10
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/