Vacon 100 INDUSTRIAL - Page 116

Table 52: Digital input settings
Index Parameter Min Max Unit Default ID Description
P3.5.1.16 Run Interlock 1
DigIN
Slot0.2
1041
P3.5.1.17 Run Interlock 2
DigIN
Slot0.2
1042
P3.5.1.18 Motor Preheat ON
DigIN
Slot0.1
1044
OPEN = No action.
CLOSED = Uses the DC
current of the motor
preheat in Stop state.
Used when the value of
P3.18.1 is 2.
P3.5.1.19 Ramp 2 Selection
DigIN
Slot0.1 *
408
OPEN = Ramp 1 Shape,
Acceleration Time 1
and Deceleration Time
1.
CLOSED = Ramp 2
Shape, Acceleration
Time 2 and Decelera-
tion Time 2.
P3.5.1.20 Acc/Dec Prohibit
DigIN
Slot0.1
415
P3.5.1.21
Preset Frequency
Selection 0
DigIN
SlotA.4 *
419
P3.5.1.22
Preset Frequency
Selection 1
Varies 420
P3.5.1.23
Preset Frequency
Selection 2
DigIN
Slot0.1 *
421
P3.5.1.24
Motor Potentiometer
UP
DigIN
Slot0.1 *
418
OPEN = Not active
CLOSED = Active.
P3.5.1.25
Motor Potentiometer
DOWN
DigIN
Slot0.1 *
417
OPEN = Not active
CLOSED = Active.
P3.5.1.26 Quick Stop Activation Varies 1213
OPEN = Activated
P3.5.1.27 Timer 1
DigIN
Slot0.1
447
P3.5.1.28 Timer 2
DigIN
Slot0.1
448
VACON · 116 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/