Vacon 100 INDUSTRIAL - Page 122

Table 59: Digital output settings on standard I/O board
Index Parameter Min Max Unit Default ID Description
P3.5.3.2.1 RO1 Function 0 62 Varies 11001
0 = None
1 = Ready
2 = Run
3 = General fault
4 = General fault inver-
ted
5 = General alarm
6 = Reversed
7 = At speed
8 = Thermistor fault
9 = Motor regulator
active
10 = Start signal active
11 = Keypad control
active
12 = I/O B control acti-
vated
13 = Limit supervision
1
14 = Limit supervision
2
15 = Fire Mode active
16 = Jogging activated
17 = Preset speed
active
18 = Quick stop activa-
ted
19 = PID in Sleep mode
20 = PID soft fill active
21 = PID feedback
supervision (limits)
22 = Ext. PID supervi-
sion (limits)
23 = Input press.
alarm/fault
VACON · 122 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/