Vacon 100 INDUSTRIAL - Page 126

Table 60: Standard I/O board analogue output settings
Index Parameter Min Max Unit Default ID Description
P3.5.4.1.1 AO1 function 0 31 2 * 10050
17 = ProcessDataIn4
(0-100%)
18 = ProcessDataIn5
(0-100%)
19 = ProcessDataIn6
(0-100%)
20 = ProcessDataIn7
(0-100%)
21 = ProcessDataIn8
(0-100%)
22 = Block Out.1
(0-100%)
23 = Block Out.2
(0-100%)
24 = Block Out.3
(0-100%)
25 = Block Out.4
(0-100%)
26 = Block Out.5
(0-100%)
27 = Block Out.6
(0-100%)
28 = Block Out.7
(0-100%)
29 = Block Out.8
(0-100%)
30 = Block Out.9
(0-100%)
31 = Block Out.10
(0-100%)
P3.5.4.1.2
AO1 filter time 0.0 300.0 s 1.0 * 10051
0 = No filtering
P3.5.4.1.3 AO1 minimum 0 1 0 * 10052
0 = 0 mA / 0V
1 = 4 mA / 2V
P3.5.4.1.4 AO1 minimum scale Varies Varies Varies 0.0 * 10053
P3.5.4.1.5 AO1 maximum scale Varies Varies Varies 0.0 * 10054
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in Chapter 12 Appendix 1.
THE ANALOGUE OUTPUTS OF THE EXPANDER SLOTS C, D AND E
Shows only the parameters for the outputs on option boards in slots C, D and E. Make the
selections as in Basic AO1 Function (P3.5.4.1.1).
This group or these parameters are not visible if there are no digital outputs in slots C, D or
E.
VACON · 126 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/