Vacon 100 INDUSTRIAL - Page 154

Table 96: Setpoints of the external PID controller
Index Parameter Min Max Unit Default ID Description
P3.14.2.5
Setpoint Source 1
Selection
0 32 1 1643
If temperature inputs
are selected, you must
set the values of param-
eters P3.14.1.8 Process
Unit Min and P3.14.1.9
Process Unit Max to
agree with the scale of
the temperature meas-
urement board.
P3.14.2.6 Setpoint 1 minimum -200.00 200.00 % 0.00 1644
P3.14.2.7 Setpoint 1 maximum -200.00 200.00 % 100.00 1645
P3.14.2.8
Setpoint source 2
selection
0 22 0 1646
See P3.14.2.5.
P3.14.2.9 Setpoint 2 minimum -200.00 200.00 % 0.00 1647
P3.14.2.10 Setpoint 2 maximum -200.00 200.00 % 100.00 1648
Table 97: Feedback of the external PID controller
Index Parameter Min Max Unit Default ID Description
P3.14.3.1 Feedback Function 1 9 1 1650
P3.14.3.2
Feedback Function
Gain
-1000.0 1000.0 % 100.0 1651
P3.14.3.3
Feedback 1 Source
Selection
0 25 1 1652
See P3.13.3.3.
P3.14.3.4 Feedback 1 Minimum -200.00 200.00 % 0.00 1653
P3.14.3.5
Feedback 1 Maxi-
mum
-200.00 200.00 % 100.00 1654
P3.14.3.6
Feedback 2 Source
Selection
0 25 2 1655
See P3.13.3.6.
P3.14.3.7 Feedback 2 Minimum -200.00 200.00 % 0.00 1656
P3.14.3.8
Feedback 2 Maxi-
mum
-200.00 200.00 % 100.00 1657
VACON · 154 PARAMETERS MENU
5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/