Vacon 100 INDUSTRIAL - Page 239

It is possible to expand the available capacity of I/O with option boards. You can install the
option boards in the slots C, D and E. You can find more data on the installation of option
boards in the Installation manual.
21 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 30 A B
21 22 23 24 25 26 33 34
Slot A
Slot B
C
A
B
D
E
A.1
G
F
A.2 A.1 A.2 A.3 A.4 A.5 A.6
Fig. 42: The option board slots and programmable inputs
A. Standard board slot A and its terminals
B. Standard board slot B and its terminals
C. Option board slot C
D. Option board slot D
E. Option board slot E
F. Programmable digital inputs (DI)
G. Programmable analogue inputs (AI)
10.6.1.1 Programming of digital inputs
You can find the applicable functions for digital inputs as parameters in parameter group
M3.5.1. To give a digital input to a function, set a value to the correct parameter. The list of
applicable functions shows in Table 52 Digital input settings.
Example
PARAMETER DESCRIPTIONS VACON · 239
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10