Vacon 100 INDUSTRIAL - Page 257

0% 100%50%
C
B
A
D
0 mA 20 mA10 mA
[Hz]
[%]
Fig. 48: The analogue input signal range, selection 0
A. Frequency reference
B. Max freq reference
C. Min freq reference
D. Analogue input signal
Selection
number
Selection name Description
1 2...10V / 4...20mA
The range of the analogue input signal is 2...10V or 4...20mA
(the dip switch settings on the control board tell which one).
The input signal is 20...100%.
0% 100%50%20%
C
B
A
D
[Hz]
[%]
0 mA 20 mA10 mA4 mA
Fig. 49: The analogue input signal range, selection 1
A. Frequency reference
B. Max freq reference
C. Min freq reference
D. Analogue input signal
PARAMETER DESCRIPTIONS VACON · 257
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
10