Vacon 100 INDUSTRIAL - Page 276

I/I
T
100%
63%
T
t
t
A
B
Fig. 57: The motor thermal time constant
A. Current
B. T = Motor thermal time constant
P3.9.2.5 MOTOR THERMAL LOADABILITY (ID 708)
Use this parameter to set the thermal loadability of the motor.
For example, if you set the value to 130%, the motor goes to the nominal temperature with
130% of the motor nominal current.
VACON · 276 PARAMETER DESCRIPTIONS
10
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/