Vacon 100 INDUSTRIAL - Page 330

P3.22.2 CAPACITOR DISCONNECTION HYSTERESIS (ID 15511)
Use this parameter to set the disconnection hysteresis for the advanced harmonic filter. The
value is in percentage of the drive nominal power.
P3.22.3 AHF OVER TEMPERATURE (ID 15513)
Use this parameter to set the digital input signal that activates AHF Over Temp (fault ID
1118).
P3.22.4 AHF FAULT RESPONSE (ID 15512)
Use this parameter to select the response of the AC drive to an AHF Over Temp fault.
VACON · 330 PARAMETER DESCRIPTIONS
10
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/