Vacon 100 INDUSTRIAL - Page 338

Fault
code
Fault ID Fault name Possible cause How to correct the fault
8 610 System fault Defective component.
Operation malfunction.
Reset the fault and restart.
Download the latest software from
the Danfoss Drives website. Update
the drive with it.
If the fault occurs again, ask
instructions from the distributor
near to you.
614 Configuration error.
Software error.
Defective component (a
defective control board).
Operation malfunction.
647 Defective component.
Operation malfunction.
648 Operation malfunction.
The system software is not
compatible with the applica-
tion.
649 A resource overload.
A parameter loading,
restoring or saving malfunc-
tion.
Load the factory default settings.
Download the latest software from
the Danfoss Drives website. Update
the drive with it.
VACON · 338 FAULT TRACING
11
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/