Vacon 100 INDUSTRIAL - 7.3 Other Fault Conditions

** = For the DIP switch configurations in VACON
®
100 X, see the VACON
®
100 X Installation
manual.
A
B
C
Fig. 15: The DIP switch
A. Digital input DIP switch
B. Floating
C. Connected to GND (Default)
Table 17: M1.1 Wizards
Index Parameter Min Max Unit Default ID Description
1.1.1 Startup wizard 0 1 0 1170
0 = Do not activate
1 = Activate
The selection Activate
starts the Start-up wiz-
ard (see Chapter 1.3
First start-up.
1.1.3 Multi-pump Wizard 0 1 0 1671
The selection Activate
starts the Multi-pump
wizard (see Chapter
2.7 Multi-pump wizard).
1.1.4 Fire mode Wizard 0 1 0 1672
The selection Activate
starts the Fire mode
wizard (see Chapter
2.8 Fire mode wizard).
VACON · 48 QUICK STARTUP GUIDE
1
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/