Vacon 100 INDUSTRIAL - Page 123

Parameters vacon • 123
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
7.1.13.5 Group 3.12.5: Interval 5
7.1.13.6 Group 3.12.6: Timer 1
7.1.13.7 Group 3.12.7: Timer 2
7.1.13.8 Group 3.12.8: Timer 3
Table 101. Timer functions, Interval 5
Code Parameter Min Max Unit Default ID Description
P3.12.5.1 ON time 00:00:00 23:59:59 hh:mm:ss 00:00:00 1484 See Interval 1
P3.12.5.2 OFF time 00:00:00 23:59:59 hh:mm:ss 00:00:00 1485 See Interval 1
P3.12.5.3 Days 1486 See Interval 1
P3.12.5.4 Assign to channel 1488 See Interval 1
Table 102. Timer functions, Timer 1
Code Parameter Min Max Unit Default ID Description
P3.12.6.1 Duration 0 72000 s 0 1489
The time the timer will run when acti-
vated. (Activated by DI)
P3.12.6.2 Timer 1
DigINSlot
0.1
447
Rising edge starts Timer 1 pro-
grammed in Group 3.12: Timer
functions parameter group.
P3.12.6.3 Assign to channel 1490
Select affected time channel (1-3)
Check box selection:
B0 = Time channel 1
B1 = Time channel 2
B2 = Time channel 3
Table 103. Timer functions, Timer 2
Code Parameter Min Max Unit Default ID Description
P3.12.7.1 Duration 0 72000 s 0 1491 See Timer 1
P3.12.7.2 Timer 2
DigINSlot
0.1
448 See Timer 1
P3.12.7.3 Assign to channel 1492 See Timer 1
Table 104. Timer functions, Timer 3
Code Parameter Min Max Unit Default ID Description
P3.12.8.1 Duration 0 72000 s 0 1493 See Timer 1
P3.12.8.2 Timer 3
DigINSlot
0.1
448 See Timer 1
P3.12.8.3 Assign to channel 1494 See Timer 1