Vacon 100 INDUSTRIAL - Solar

vacon • 88 Monitoring menu
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
6.1.11 Solar
V2.12.11 FB Status Word 1 864
Fieldbus status word sent by application in bypass
mode/format. Depending on the FB type or profile the
data can be modified before sent to the FB.
V2.12.12 FB Speed Actual 0.01 865
Actual speed in %. 0 and 100% correspond to minimum
and maximum frequencies respectively. This is contin-
uously updated depending on the momentary min and
max frequencies and the output frequency.
V2.12.13 FB data out 1 1 866 Raw value of process data in 32-bit signed format
V2.12.14 FB data out 2 1 867 Raw value of process data in 32-bit signed format
V2.12.15 FB data out 3 1 868 Raw value of process data in 32-bit signed format
V2.12.16 FB data out 4 1 869 Raw value of process data in 32-bit signed format
V2.12.17 FB data out 5 1 870 Raw value of process data in 32-bit signed format
V2.12.18 FB data out 6 1 871 Raw value of process data in 32-bit signed format
V2.12.19 FB data out 7 1 872 Raw value of process data in 32-bit signed format
V2.12.20 FB data out 8 1 873 Raw value of process data in 32-bit signed format
Table 56. Solar monitoring items
Code
Monitoring
value
Unit Scale ID Description
V2.15.1 Vmp ref V 1914 DC voltage reference for MPP regulation
V2.15.2 Vmp ref correct V 1942
Present correction on DC voltage reference (P&O +
oscillation)
V2.15.3 Motor power kW 1938 Motor shaft power
V2.15.4 Energy counter MWh 1937 Counter of energy taken by the supply
B2.15.5
Energy counter
reset
1932 To reset V2.15.4
V2.15.6
Irradiation mea-
sure
W/m
2
1982 Measurement from irradiation signal.
Table 55. Fieldbus data monitoring
Code
Monitoring
value
Unit Scale ID Description