Vacon 100 INDUSTRIAL - User Settings

vacon • 76 User interfaces
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5.3.6 User settings
5.3.6.1 Parameter backup
Table 41. User settings menu, General settings
Code Parameter Min Max Unit Default ID Description
P6.1 Language selections Varies Varies Varies 802 Depends on language package.
P6.2 Application selection 801
M6.5 Parameter backup See chapter 5.3.6.1 below.
P6.7 Drive name Give name of drive if needed.
Table 42. User settings menu, Parameter backup parameters
Code Parameter Min Max Unit Default ID Description
P6.5.1
Restore factory
defaults
831
Restores default parameter values
and initiates the Startup Wizard
when activated
P6.5.2
Save to keypad
*
*. Only available with graphical keypad
01 0
Save parameter values to keypad
to e.g. copy them to another drive.
0 = No
1 = Yes
P6.5.3 Restore from keypad*
Load parameter values from key-
pad to the drive.
B6.5.4 Save to Set 1
Store a customized parameter set
(all parameters included in the
application)
B6.5.5 Restore from Set 1
Load the customized parameter
set to the drive.
B6.5.6 Save to Set 2
Store another customized param-
eter set (all parameters included
in the application)
B6.5.7 Restore from Set 2
Load the customized parameter
set 2 to the drive.