vacon • 58 User interfaces
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Quick edit
Through the
Quick edit functionality you can quickly access the desired parameter by entering the
parameter’s ID number.
1. Anywhere in the menu structure, push the FUNCT button.
2. Push the Arrow up or the Arrow down buttons to select Quick Edit and confirm with the OK but-
ton.
3. Then enter the ID number of parameter or monitoring value you wish to access. Press OK but-
ton to confirm.
4. Requested Parameter/Monitoring value appears on the display (in editing/monitoring mode.)
To Next Page
Loading...
