Vacon 100 INDUSTRIAL - Page 67

User interfaces vacon • 67
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5.3.5.2 Option board slots
The parameters of this group depend on the option board installed. If no option board is placed in
slots D or E, no parameters are visible.
As an option board is removed, info text 39
Device removed will appear on the display.
5.3.5.3 Programming of digital and analogue inputs
The programming of inputs in the VACON
®
100 X Solar Pump Application is very flexible. The avail-
able inputs on the standard and optional I/O can be used for various functions according to the op-
erator's choice.
The available I/O can be expanded with optional boards to be inserted in board slots D and E. More
information about the installation of optional boards you will find in the VACON
®
100 X Installation
manual.
5.3.5.4 Digital inputs
The applicable functions for digital inputs are arranged as parameters in parameter group M3.5.1.
The value given to the parameter is a reference to the digital input you choose to use for the func-
tion. The list of functions that you can assign to the available digital inputs is presented on Digital
Inputs group.
Example
Figure 27.
Table 29. Option board-related parameters
Menu Function Note
Slot D Settings Option board related settings.
Monitoring Monitor option board-related info.
Slot E Settings Option board related settings.
Monitoring Monitor option board-related info.
GRAPHICAL KEYPAD
Parameter name (= Function)
Parameter name (= Function)
Parameter value (= selected digital input)
Parameter value (= selected digital input)