Vacon 100 INDUSTRIAL - Page 81

Monitoring menu vacon • 81
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Table 47. Trend curve parameters
Code Parameter Min Max Unit Default ID Description
M2.2.1 View Trend curve
Enter this menu to select and
monitor values for viewing in
curve form.
P2.2.2 Sampling interval 100 432000 ms 100 2368 Set here the sampling interval.
P2.2.3 Channel 1 min -214748 1000 -1000 2369
Used by default for scaling.
Adjustments might be necessary.
P2.2.4 Channel 1 max -1000 214748 1000 2370
Used by default for scaling.
Adjustments might be necessary.
P2.2.5 Channel 2 min -214748 1000 -1000 2371
Used by default for scaling.
Adjustments might be necessary.
P2.2.6 Channel 2 max -1000 214748 1000 2372
Used by default for scaling.
Adjustments might be necessary.
P2.2.7 Autoscale 0 1 0 2373
The selected signal is automati-
cally scaled between min and max
values if this parameter is given
value 1.
9251.emf
OK