Vacon 100 X - Page 70

7
vacon • 67 Technical data
Communication
interface
Fieldbus
Standard: Serial communication (RS485/Mod-
bus); Ethernet IP, Profinet IO, Modbus TCP, Bac-
net IP
Optional: CanOpen; Profibus DP, DeviceNet, Lon-
works
Status indicators
Drive status indicators (LED) on top side (POWER,
RUN, FAULT, READY)
Ambient
conditions
Ambient operating tem-
perature
-10°C …+40°C
Extended temperature
range
up to 60°C with current derating (see chapter 1.8)
Storage temperature -40°C…+70°C
Relative humidity
0 to 100% R
H
Pollution degree
PD2 used for PCB design.
However the drives are suitable for outdoor use
because of dust-tight enclosure to numeral 6
[acc. to IEC 60529].
Altitude
100% load capacity (no derating) up to 1,000m;
derating 1%/100m at 1,000...3,000m
Stationary vibration:
sinusoidal
3 Hz ≤ f ≤ 8,72 Hz: 10 mm
8,72 Hz
≤ f ≤ 200 Hz: 3g
[3M7 acc. to IEC 60721-3-3]
Shock/Bump
25g / 6 ms
[3M7 acc. to IEC 60721-3-3]
Degree of protection IP66/Type 4X
Noise Level
Average noise level (min-
max) in dB (A)
The sound pressure depends on the cooling fan
speed, which is controlled in accordance with the
drive temperature.
MM4: 45-56
MM5: 57-65
MM6: 63-72
Directives
EMC 2004/108/EC
Low Voltage Directive 2006/95/EC
RoHS 2002/95/EC
WEEE 2012/19/EC
Standards
Immunity
EN61800-3 (2004), 1
st
and 2
nd
environment
Emissions
EN61800-3 (2004), Category C2
The drive can be modified for IT-networks.
THD EN61000-3-12 (see chapter 1.9)
Safety EN 61800-5-1
Production quality ISO 9001
Approvals
Functional Safety TÜV (Rheinland) - Tested
Electrical Safety TÜV (SÜD) - Tested
EMC TÜV - Tested
USA, Canada cULus approval, file number E171278