Functional checks
Procedure
Once the unit has been installed and
the gas supply has been checked,
operate the system to ensure that it is
working correctly.
● Operate the system, following the
operating instructions supplied with
the boiler.
● Check the system for water leaks
and escaping gas.
● Check that the flue has been
correctly installed, according to the
fitting instructions supplied with the
flue assembly.
● Check the burner for correct
ignition and flame picture.
● TURBOmax Plus only: Check the
hot water system for correct
operation.
● Check the heating system for
correct operation.
Fig. F.1: Test for correct functioning
Euro B/S 058/0
To Next Page
Loading...
