Chapter 3 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 19
Mounting with DIN Rail Installation
Kit
DIN rail installation kit includes a wall mounting kit, 2 clip-fasteners,
and 2 screws M4 x 10 DIN 7985 (Vaisala order code 215094).
To mount PTB330 using the DIN rail installation kit:
1. Attach two spring holders to the plastic mounting plate by using
the screws provided in the installation kit.
2. Fasten the barometer to the plastic mounting plate with 4 screws
provided for that purpose.
3. Press the barometer onto the DIN rail so that the clip-fasteners
snap into the rail.
Figure 6 Mounting with DIN Rail Installation Kit
Pole Installation with Installation
Kit for Pole or Pipeline
Installation kit for pole or pipeline (Vaisala order code: 215108)
includes the metal mounting plate and 4 mounting nuts for pole
mounting. When mounting, the arrow in the metal mounting plate
must point upwards; see Figure 10 on page 21.
To Next Page
Loading...
