USER'S GUIDE____________________________________________________________________
48 __________________________________________________________________ M210855EN-D
Numbers refer to Figure 28 on page 47:
1 = The Info shortcut key/left function button with guiding text
2 = The Graph shortcut button/right function button with guiding
text
3 = Quantities selected for display. Note that units displayed (for
example P) depend on the type of measurements.
NOTE
To return directly to the basic display from any view, press and hold
down the top right button on the front panel for two seconds.
Menus and Navigation
To change settings and select functions in the menus, do the
following:
1. Open the MAIN MENU by pressing any of the arrow buttons in
the basic display.
2. Move in the menus vertically with the up/down arrow buttons
and enter/exit submenus with the left/right arrow buttons.
3. Select an option from a list this way: move to the desired option
by pressing the down arrow button as many times as needed.
The option is selected once it is highlighted.
4. Submenu is indicated with an arrow pointing right. Open a
submenu by pressing the right arrow button.
5. Set value by pressing the left function button.
6. Press the left arrow button to return to the previous menu level.
7. Press the EXIT button to return directly to the basic display.
Figure 29 Main Menu (Main Level)
To Next Page
Loading...
