Vaisala BAROCAP PTB330 - Measurement Related Commands; Tqfe

Chapter 4 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 77
Measurement Related Commands
TQFE
Use the TQFE command to show or set the temperature for QFE
corrected pressure. The valid range of QFE temperature is -80...+200
°C.
TQFE [?] [x] [y]
where:
? = Displays the current QFE temperature. You cannot use this
modifier with the other modifiers.
x = Numeric value (temperature).
Ranges:
-80 … 200 °C
-110…390 °F
190…470 K
y = Temperature scale used.
Values:
‘C
‘F
K
Examples:
Query syntax:
>TQFE ?
QFE temp. : 20.00 'C
>
Prompt syntax:
>TQFE
QFE temp. : 20.00 'C ? 70 'F
>
Command line syntax:
>TQFE 300 K
QFE temp. : 300.00 K
>