Vaisala HUMICAP HMW90 SERIES - Safety Precautions; ESD Protection; Recycling Guidelines

Chapter 1 _________________________________________________________ General Information
VAISALA _________________________________________________________________________ 9
Safety
The HMW90 series transmitter delivered to you has been tested and
approved as shipped from the factory. Note the following precautions:
WARNING
Connect only de
-energized wires.
CAUTION
Do not modify the unit. Improper modification can damage the product
or lead to malfunction.
ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage to
electronic circuits. Vaisala products are adequately protected against
ESD for their intended use. It is possible to damage the product,
however, by delivering electrostatic discharges when touching,
removing, or inserting any objects inside the equipment housing.
To make sure you are not delivering high static voltages yourself:
- Handle ESD sensitive components on a properly grounded and
protected ESD workbench.
- Always hold component boards by the edges and avoid touching the
component contacts.
Recycling
Recycle all applicable material.
Dispose of the unit acco
rding to statutory regulations.
Do not dispose of with regular household refuse.