Vaisala Indigo 520 - DIN Rail Mounting; Figure 5 Adapter Plate Dimensions

mm
[in]
96 [3.8]
169 [6.7]
183 [7.2]
Ø 7
[0.28]
115 [4.5]
Figure 5 Adapter plate dimensions
1. Attach the adapter plate to the mounting holes using 4 screws and 4 wall plugs.
2. Open the 2 hex screws on the cover of the transmitter using a 4-mm hex key.
3. Open the transmitter cover.
4. Attach the transmitter to the adapter plate using 2 × 14-mm screws and a 5-mm hex key.
Place nylon washers under the screws to protect the surface of the transmitter.
3.2.3 DIN rail mounting
• Hex keys (4 and 5 mm), provided
• Screws 14 mm (2 pcs), provided
• Washers (2 pcs), provided
• DIN rail clip fasteners (2 pcs),
provided
Indigo 520 User Guide M212287EN-A
20