4. The default language of the user interface is English. If you want to use another language,
select it in Transmitter > Language.
Your transmitter is now ready for operation. You can next go through these additional settings:
• Date and time
• Network
5.1.1 Configuring network connection on touchscreen
Before you start, find out from your local network administrator whether your transmitter uses
dynamic or static network settings.
• Dynamic network settings are automatically assigned by a DHCP server each time the
transmitter is powered up.
• Static network settings must be configured manually. Ask your local network
administrator for the settings.
Chapter 5 – Start-up
35
To Next Page
Loading...
