Vaisala Indigo 520 - Configuring Home Views on Touchscreen; Figure 21 Configurable Home Views on Touchscreen

6.2 Configuring home views on touchscreen
You can select how many measurement parameters you want to see in the following Home
views on the touchscreen display:
• Measurements view
• Graph view
1
2
Figure 21 Configurable Home views on touchscreen
1 Measurements view with slots for 1 … 4 measurement parameters
2 Graph view with graphs for 1 … 2 measurement parameters
You can navigate between the views by using the left and right arrows at the
bottom of the touchscreen.
Before you start, make sure that the probes you want to use are connected to the transmitter.
1. Select the configuration menu symbol at the upper right corner of the touchscreen.
2. Select Home settings.
Indigo 520 User Guide M212287EN-A
48